7 Trap Bar Deadlift Workouts for Strength (How-To Guide)

The 5x5 method is a traditional strength-building method used in lifting sports such as Olympic lifting, but in any sport that aims to develop strength too.

The 5x5 method means 5 sets, and you perform 5 repetitions without a pause in one set.

The load of the trap bar should be determined by your 1RM (1 repetition maximum), meaning you should calculate what your 5RM is.

The most important thing for implementing the 5x5 method is to include enough rest between the sets.

It has been proven that 2-5 minutes between high-intensity sets is the best for strength development.

Before you start the 5x5 method, you must warm up your body properly by raising its temperature and performing warm-up sets with lighter trap bar weights.

The Ladder Set

The ladder set can also be considered a drop set.

You start the ladder set by loading the bar with 90% of your one repetition max.

You do 3 reps with 90% of your 1RM and then remove the weights so 85% of your 1RM is left. 

Then you perform 5 reps with that weight and again remove some weight so 80% of your 1RM is left.

You do this until you reach 75% of your one rep max and do it for 9 reps.

After completing the first half, it is time to return to the 3RM or 90% of your 1RM.

Technically, no rest intervals are included, and you can only rest when placing or removing weight plates.

The first two methods were good for strength development, but this one is the best for endurance or strength endurance.

EMOM essentially completes the desired number of reps in the same interval. Let's say the whole workout lasts for 20 minutes.

You will perform 10 reps of 50% 1RM every minute, resting for the remainder.

An example workout would be to perform 10 reps of your 60% 1RM for one minute.

The whole workout duration would be 10 minutes, meaning there will be 10 sets included.

Accessorize

A trap bar workout can also be considered if you perform accessory exercises to support the development of the lift.

You may add accessory exercises at the end of each trap bar workout or include them in the workout itself.

Some of the exercises you may perform to boost the performance of your trap bar 1RM include:

• Barbell rows
• Neutral-grip lat pulldown
• Prone dumbbell row
• Chin-up

These exercises target similar muscle groups as the trap bar does.

Implementing them can increase the likelihood of your 1RM rising for the duration of a mesocycle.

Pull movement pattern is essential for developing strong and functional posterior chain muscles.

Pull exercises can be beneficial for implementing if you aim to support the trap bar workout.

Some pull exercises you may include are:

• Barbell rows
• Pull-ups
• Single-arm dumbbell rows
• One-arm cable rows
• Lat machine pulldowns
• Kaiser pulls

All these exercises will develop muscles that work during the trap bar workout.

Push

Push movement pattern is essential for developing healthy anterior chain muscles.

It is divided into vertical and horizontal push movement patterns.

Some push exercises you may include to supplement your trap bar workouts include:

• Barbell bench press
• One-arm dumbbell bench press
• Incline bench press
• Decline bench press
• Dips
• Barbell overhead press
• Single-arm kettlebell overhead press
• Landmine press

All these exercises should be implemented in a workout program to develop your body holistically and avoid building muscle imbalances.

Rotation belongs to the core, and the primary muscles responsible for trunk rotation are the obliquus internus and externus.

Those two muscles flex and rotate the body.

Rotation strength and power are essential for developing a healthy trunk without muscle imbalances.

Some core rotation exercises you may include are:

• Band rotation
• Medicine ball throw
• Cable chops
• Cable lifts

However, when you don’t do trap bar workouts, you may include anti-rotation and anti-flexion exercises to improve the stability of your trunk.

To do the trap bar deadlift, you must keep your back flat, brace your core, and your knees should follow the line of your toes.

The proper hex bar deadlift technique is similar to the conventional barbell deadlift technique, but there are slight differences.

The conventional barbell deadlift will place your body in a less favorable position for the posterior chain muscles.

Many prefer trap bars over a conventional deadlift with a barbell.

Here is how to perform the trap bar deadlift properly:

1. Load the hex bar with the appropriate weight and enter it with both legs.
2. Assume a standing position in the middle of the hex bar and take a neutral grip with your hands.
3. Bend forward in your hips, keep your back flat, brace your core, and inhale.
4. Start the exercise by pulling the trap bar upward and pushing through your legs simultaneously.
5. Avoid the trap bar bent forward or backward since you may injure yourself due to the lack of balance.
6. When you reach the fully extended position, slowly reverse the movement by bending at all three joints in your lower body.

The trap bar is excellent for beginner lifters, young athletes, and older adults since it places less stress on the lower back than the regular barbell deadlift.

The center of the weight is located where the hex diagonals meet, basically in line with your spine.

This shifts the weight towards your anterior chain muscles, allowing you to target both agonist and antagonist muscles with a single exercise.

This is what is lacking with a straight bar deadlift.

Also, the range of motion is significantly better than the rest of the fitness equipment [2].

Mainly that’s the primary reason people modify exercises and perform:

• Trap bar push up
• Trap bar farmers carry
• Trap bar floor press
• Trap bar overhead press

All these exercises place your joints in a more favorable position, making them less prone to injury.

Increased Lower Body Strength

Trap bar deadlifts are the primary lift used to develop lower body strength for many team sports, including football and basketball [3].

Trap bars strengthen anterior and posterior muscles, meaning they will holistically develop your body [4].

Trap bars are essential to building strength for sprinting, jumping, and explosive movements in general.

You may easily increase the maximal strength of your limbs by overloading trap bar deadlifts to the point where your body needs to supercompensate (read adapt).

Supplemental weightlifting training is also considered an accessory lift that aims to support the main lift's development.

You may use trap bar deadlifts to support the development of main lifts, such as traditional deadlifts and back squats.

You can supplement these mainly because they are of a similar movement and biomechanical structure, meaning a greater strength carryover will occur.

Depending on your training goals, you may supplement the main lifts on the same or separate workout sessions.

Decreased Lumbar Stress

The thing I like the most about trap bar deadlifts is the ability to perform heavy repetitions without too much stress on the lumbar spine.

Many fitness enthusiasts and even professional lifters suffer from low back pain due to lifting heavy reps of traditional barbell deadlifts or back squats.

If you want to experience similar effects or maintain current strength levels while you recover from the heavy back squatting and deadlifting, you may incorporate hex bar deadlifts instead [5].

This will take a big proportion of low back stress and place it on the anterior structure of the body.

Trap bar deadlift induces strength and hypertrophy in your hip and leg muscles.

The primary muscles you may develop by incorporating trap bar deadlifts are erector spinae, glutes, hamstrings, and quadriceps.

This means that trap bar deadlift is excellent for developing anterior and posterior chain strength.

Ability to Overload

The trap bar deadlift is much easier to overload than back squats or barbell deadlifts.

This is why it is so convenient for professional sports [6].

The main reason is the favorable position of the spine.

The barbell back squat places your spine in a less advantageous position, making it more likely for you to get injured while lifting heavy weights.

It is the same for barbell deadlifts since the bar's position in front of your body places much more stress on your lumbar spine.

You must implement trap bar deadlifts to develop maximal strength and hypertrophy.

You may easily overload it and even support the previously mentioned lifts, increasing their 1RM.

"The trap-bar deadlift is one of the few back exercises that rivals the conventional barbell deadlift. Although they look different at first glance, they’re far more similar than most people realize."

- Michael Matthews, Certified Personal Trainer

Hamstrings are a special group of muscles located at the back of the upper leg and have two functions.

The first function is knee flexion, and the second is hip extension.

The long biceps femoris muscle works in both knee flexion and hip extension.

The other two muscles, including semitendinosus and semimembranosus, are primarily responsible for knee flexion.

However, the eccentric phase of the trap bar deadlift requires all three muscles to work synergistically.

Quadriceps

Like the hamstrings, the quadriceps also have two functions.

The primary function of quadriceps muscles is knee extension, and the secondary is hip flexion.

The four quadriceps muscles activated during the trap bar exercise are rectus femoris, vastus medialis, vastus lateralis, and vastus intermedius.

However, the strongest quadriceps muscle, rectus femoris, is responsible for hope flexion and knee extension.

The erector spinae is the long muscle located along the whole spine.

The purpose of a trap bar deadlift, at least partially, is to place the body in a more favorable position, making your erector spinae muscle work less.

We prefer to take the stress of our lumbar spine because it is associated with a bigger chance of injury, and hurting your back is the worst.

This is because the spine connects the whole body; every piece of information in our peripheral system goes through it.

Hurting your spine prevents you from running, walking, or even standing normally.

If you feel pain during deadlifting or squatting, try incorporating trap bar deadlifts to lower the stress on the lower back.

Traps and Upper Back

Trapezius muscles and upper back muscles will primarily work to stabilize or to produce a partial range of motion at the end of the movement.

You can’t build huge traps and upper back solely from trap bar deadlifting, but certain stability and strength will be developed.

There is a saying that strength doesn't like the same thing to see twice.

This means that if you want to train for strength, you must always change either volume, intensity, number of reps, or the type of exercise.

Adding this compound lift to your arsenal will increase deadlifting and squat strength.

Olympic Weightlifters

If you are an Olympic lifter, you will greatly benefit from trap bar deadlifts since they will help you place less stress on your lower back.

However, implementing the trap bar deadlift for Olympic lifters will mainly be based on their discipline.

Related: Beginner Olympic Weightlifting Program

The previously mentioned thing will count for all disciplines but is extremely beneficial for CorssFitters who constantly push their bodies to the next level.

CrossFitters may incorporate trap bar deadlifts as a main compound lift or accessory.

You may also alternate between squats and trap bar deadlifts to constantly evoke new neuromuscular adaptations in your system.

Beginning Gymgoers

Finally, the beginners are the ones who benefit the most from the trap bars.

This is because they get an injury-free experience, build strength and hypertrophy, and develop a solid foundation for further development.

Also, the best thing about trap bars for beginners is they will effectively develop both your anterior and posterior chain muscles.